 3D printed part to hold a rectangular piece of wood that is 6 1/2 by 9 1/4 by 1/2 inches. The hook is made to fit on a loft bed bar that is 1 inch. I would recommend drilling through the hole again so the edges are more refined. I wouldn't put something ridiculously heavy on it its meant more for the tissues, 1 book, maybe your alarm, ect. Light things that fit.

loftbedfile.stl

Mini Fridge

This is a hook to hold your Ripsticks. I printed it with around 30% infill. You can find out more in this video: https://www.youtube.com/watch?v=yZgYXUaoU4U You can find related things on our channel: https://www.youtube.com/@workshoppop4709

Ripstick Hook

This bracket is designed to hold chairs. I printed it with 90 % zig zag infill. There is more info on our YouTube video: https://www.youtube.com/watch?v=kSf4YSCsYMM You can find other related things on our channel: https://www.youtube.com/@workshoppop4709

Chair Bracket 

WARNING: NOT IN PROPORTION TO EITHER TABLE. 

Mini Dining Chair

Mini Couch

Dining Table

This is a small jail cell with a removable lid. It can be used to keep things such a phone, pencils, and anything you might want. It is 4 by 4 by 7 inches and has a 20 % infill on the bottom and lid and 100% on the jail posts.

Mini Jail Cell

You like bookshelf's? Here's a small version! They can hold small things. I use it told hold the organs that broke off of my tiny human model.

Mini Bookshelf

If you want some art decor then you can print this. I did it at 10% infill. Make sure to do supports for the letters otherwise it won't look as nice.

Art Decor sign

This is a mini island that comes from a kitchen.

Mini Counter

This is a French cleat hook to hold your drill on a piece of wood to help you organize. You can find more info on our video: https://www.youtube.com/watch?v=kSf4YSCsYMM You can find other related things on our channel: https://www.youtube.com/@workshoppop4709

Tool set and drill French Kleet

I would do this around 50% infill maybe even 60% with it being cubic you need 2 to hold the scooters and/or pogo sticks. You can find out more in this video: https://www.youtube.com/watch?v=yZgYXUaoU4U You can find other related stuff in our channel: https://www.youtube.com/@workshoppop4709

Scooter/Pogo stick Hook

This is a hook to hold your lawn chairs to help with organization. I would print it at the minimum a 55% infill with the pattern being gyroid. There is more info in our YouTube video: https://www.youtube.com/watch?v=te0NSUzcJkk&t=3s There are related things on our channel: https://www.youtube.com/@workshoppop4709

Lawn chair Hook

You need 2 of these in order to hold a longboard but printing 2 instead of having one print like the longboard hook 1.0 cuts down on the amount of filament you use and the time you spend printing. I did these with 30% cubic infill.  You can find out more in this video: https://www.youtube.com/watch?v=yZgYXUaoU4U You can see other related stuff on our channel https://www.youtube.com/@workshoppop4709

Longboard Hook 2.0

This is a hook to hold a longboard or even just a skateboard so that way they aren't just lying around.

Longboard hook

As you can see in the photos they are good at holding small things like erasers.

Mini Cubies


This is a fancy table for you to print as a miniature to have around.  It's 6 by 3 by 2 inches. 

Fancy Table

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Luna Roberts

Achievements

Seedling