Berd Air Duct for EVA.stl
25 downloads · 5 years ago · I have made a Berd Air duct for the EVA print head.
I tested it only with the Dragon hotend so far.
I have made a Berd Air duct for the EVA print head. I tested it only with the Dragon hotend so far.
There are little notches as a guide for the holes in the pipe. I closed the pipes by soldering them. You can use the drilling jig to cut the pipes to the correct length of 32mm. Just put the 3mm pipe into the hole, drill it with a 1,5mm drill and then cut it.
Ender3 Starlex Single Air Duct with BL touch space or Dual Air Duct
Berd Air mod for Voron 2.4 (any afterburner compatible)
Ender3 Clip Pivot Dual Air Duct, Multi Fans Options, No Screw, No Tool, Easy Access, Rotating!
Dual 120mm mounted fans to 4 inch female air duct hose adapter
Shipto you
PSSX00402 air duct Scalextric OPEL Vectra
Air Duct Replacement for Monoprice v2 Printer
Voron 2.4 Berd Air Drill Guide
Zesty Nimble - drive cable clips, reverse bowden clips, berd air tube, etc
Geeetech A10 ring fan-duct (better air flow and stronger mounts)
15CM AirBlower Duct for ACTION FROYAK air blower
STL To Wall Mount Flexible Ventilation Air Hose, Exhaust Ducting
Mobile Air Conditioner Exhaust Duct Adapter
Swiss3DC Dual Duct No Screw, No Tool
4-inch HEPA Air Filter Attachment & Ventilation Duct Adapter for Universal 3D Printer Enclosure by 3D Sourcerer
Toshiba Portable Air Conditioner (AC) Exhaust to 6 Inch Duct Adapter
NR200 Ventus 3080 12gb duct
Hero Me Remix 2 with Robust Assembly & Extended Wire Management
5.9 inch diameter AC window vent to 4inch female duct adapter
Anycubic Vyper & Kobra Max Part Cooling Duct UPGRADE! - Improved print quality
