This is similar to other parametric models, but this is OpenSCAD based.

Turns out its hard to fit a grid of a different dimension inside another grid of a different dimension reliably without relative alignment. But it's been done, so here you go.

This is a gridfinity 1x2 with 2x3 tray routes for six total trays.

There is also a lid that can be printed should you want to keep your parts contained and separated.

~If I find a bigger use for this I will fix the code to be properly parametric.~ It has been done.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax


Parametric Gridfinity Small Parts Containment Tray 

gridfinity_small_parts_containment_lid.stl

gridfinity_small_parts_containment.stl

A gridfinity based syringe stand that can support 5-35cc syringes of various sizes with or without their needles. Use the SCAD files to parameterize your print.

The base has a shallow recess to collect any accidental drips for easy cleaning. I have left the outer gridfinity flange on the base as a safety measure in case the syringe completely leaks out.

The holder ring on the stand has integral supports for better printing without support material. These double as holes to store most spare luer lock based needles and applicators.

I use this for my 10cc Amtech flux syringes.

The holder STL is for 15mm diameter syringes with a need+barrel length of 110mm. The base STL is interchangeable.

The holder portion can take some force to press into the base as it has press-fit latching notches.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Parametric Gridfinity Syringe Stand 

gridfinity_syringe_holder_base.stl

gridfinity_syringe_holder_stand.stl

This is a Gridfinity 1x4 that can hold 4 Mitsubishi Uni drop pencils. It also has a small slot above the pencils that will tightly grasp Hi-Polymer erasers.

You will have an easier time if you remove the pocket clip from the pencils.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Gridfinity Mitsubishi Uni Drop Pencil Holder

This is a Gridfinity 1x4 that can hold 4 Mitsubishi Uni drop pencils. It also has a small slot above the pencils that will tightly grasp Hi-Polymer erasers.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

LogoiLab

Achievements

Seedling

Fan Favorite

Voyager