This is a PCIe bracket for Intel XF SR based networking cards. These are similar to the Intel X520 but use XFP/QSFP+
List of compatible devices:
- Intel XF SR 10Gbe
- IBM 5772
This may work with other Intel 10Gbe XFP based cards but has only been tested with the above listed devices.
The SCAD file allows for the choice of upper and lower port as well as dual port models.
Because of the tolerances of this part designed to work on multiple types of printers, the screw holes may be tight and will need to be stretched, this is fairly simple to do, it can be done using any pointed object of the correct diameter. The screw holes were designed to fit over-tight to hold the card firmly and to support the use of different types of screws. If you are having issues, the SCAD file is available for you to modify the screw hole radius.
more info about these can be found here: https://www.intel.com/content/www/us/en/products/docs/network-io/ethernet/network-adapters/10-gigabit-xf-server-adapters-brief.html