A modern planter with a hidden drip tray.

The legs need to be glued in to the base. I typically use Weld-On and a syringe to attached the legs but super glue works too!

You may notice some stringing in between the fans but a torch or heat gun gets rid of them easily.

Supports None needed!

Scaling Can be scaled up or down.

Orientation The planter and tray should have their bottoms on the build plate. The legs should be upright. Use brims for the legs.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament & Hardware Filament: Bambu Lab Latte Brown Matte PLA

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods