📱 Enhance Your Workspace with our 3D Printed MagSafe iPhone Desk Charger/Dock – Ball Shaped Edition! 🌐

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right.

Unique Design for Modern Spaces:
🌟 Sleek and Stylish: Perfect for Modern Offices and Nightstands!

Elevate your desk aesthetic with our ball-shaped MagSafe iPhone desk charger/dock.
Designed to seamlessly blend with contemporary decor.

Convenient Cable Management:
🔗 Hassle-Free Charging Setup: Cable Hole and Snap-On Design!
Back hole for easy cable threading.
Front disc portion seamlessly snaps onto your MagSafe charger.

iPhone MagSafe Dock, Phone Desk Stand, 3D Printed Globe (Personal Use Version)

MagSafeBall-Personal.stl

🔵 Upgrade Your Desk Setup with our AirPods Max Desk Holder (Deep Sleep Capable & Charging Cable Storage Nook)! 🎧

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right.

Deep Sleep Mode Supported:
💤 Enhanced Power Saving: Deep Sleep Capable Cradle!
Magnets in the cradle activate Deep Sleep mode for your AirPods Max.
Efficiently preserves battery life just like the original case.

Proper Positioning for Deep Sleep:
🔄 Easy Setup for Optimal Performance!
Open Bluetooth settings and confirm AirPods Max connection.
Place headphones into the cradle with magnets facing inward.
Wait for AirPods Max to show as disconnected (5-10 seconds).
If not disconnecting, adjust positioning or try turning the cradle around.

Charging Cable Storage Nook:
🔌 Tidy and Organized: Built-In Cable Storage!
Keep your charging cable within reach, neatly tucked away in the cradle.

AirPods Max Desk Holder with Deep Sleep Capability

AirPodsMaxDeskHolder-Personal copy.stl

🎮 Organize Your Gaming Space with our Under Desk Controller Mount for Xbox Controllers! 🕹️

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right.

Perfect Gaming Companion:
🌟 Enhance Your Gaming Setup: Neatly Store Your Xbox Controllers!
Stick the mount under your desk, TV, or shelf for easy access.
Slide your Xbox controller sticks into the designated slots for a tidy space.

Easy Installation:
🛠️ Hassle-Free Setup: Peel, Stick, and Mount! Or screw into desk for a more secure mount

Xbox Under Desk Controller Stick Mount

XboxStickHolderPersonal.stl

This is personal use version of our car cup adapter for Stanley 64oz Tumbler Water Bottles. This car cup adapter fits 99% of car cup holders. As long as your car cup holder fits a soda can, this should work.

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right. We recommend a .6mm nozzle!

The "basket" portion comes is 119mm in diameter. If your bottle is a few mm smaller in diameter than 119mm, it should fit fine. 


Stanley64OzTumblerAdapter-Personal.stl

This is personal use version of our three different sized Car Cup Adapters for Water Bottles. This car cup adapter fits 99% of car cup holders. As long as your car cup holder fits a soda can, this should work.

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right. We recommend a .6mm nozzle!

The "basket" portion comes in 3 sizes. 91mm, 96mm, and 101mm. If your bottle is a few mm smaller in diameter than one of these, it should fit fine. Additionally, 8.4oz Red Bull cans can fit in the middle!

List of tested bottles:
91mm: 
26oz Yeti

96mm:
Nalgene Wide Mouth Plastic 32 oz
Nalgene Wide Mouth Plastic 38 oz
Nalgene Wide Mouth Steel 32 oz
Nalgene Wide Mouth Steel 38 oz
Nalgene N-Gen 30 oz
Nalgene OFT 32 oz
Yeti Rambler Mug 10 oz (Note: The 14oz Yeti Mug WILL NOT fit)
Yeti Rambler Mug 24 oz
Hydro Flask Wide Mouth 32 oz
Hydro Flask Wide Mouth 40 oz
Red Bull Can 8.4 oz
Owala Freesip 40oz Bottle

101mm:
36oz Yeti (some special editions are bigger, check first!

3 Pack - Car Cup Holder Adapters for 26oz Yeti, 36oz Yeti, Nalgene, HydroFlask and More!

91mm Car Cup Adapter.stl

This is personal use version of our Car Cup Adapter for 26oz Yeti Rambler Water Bottles. This car cup adapter fits 99% of car cup holders. As long as your car cup holder fits a soda can, this should work.

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right. We recommend a .6mm nozzle!

The "basket" portion of this is 91mm in diameter or 3.6 inches. If your bottle is a few mm smaller in diameter than it should fit fine. Additionally, 8.4oz Red Bull cans can fit in the middle!

List of tested bottles:
26oz Yeti Rambler

26oz Yeti Rambler Cap Cup Adapter (Personal Use)

This is personal use version of our Car Cup Adapter for 36 oz Yeti Ramblers. This car cup adapter fits 99% of car cup holders. As long as your car cup holder fits a soda can, this should work. This should fit most 36oz Yeti Ramblers be be sure to check the measurements below and confirm your bottle will fit.

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right. We recommend a .6mm nozzle!

The "basket" portion of this is 101mm in diameter or 4 inches. If your bottle is a few mm smaller in diameter than it should fit fine. Additionally, 8.4oz Red Bull cans can fit in the middle!

36oz Yeti Rambler Car Cup Adapter (101mm Diameter) - Personal Use

CarCupHolder101mm.stl

This is personal use version of our Car Cup Adapter for Nalgene and HydroFlasks. This car cup adapter fits 99% of car cup holders. As long as your car cup holder fits a soda can, this should work.

🚨🚨This is the branded option and is for personal use only. For a commercial license, please join our subscription plan. The commercial version comes unbranded so you can add your own!

There is an attached PDF with important settings for printing just right. We recommend a .6mm nozzle!

The "basket" portion of this is 96mm in diameter or 3.75 inches. If your bottle is a few mm smaller in diameter than it should fit fine. Additionally, 8.4oz Red Bull cans can fit in the middle!

List of tested bottles:
Nalgene Wide Mouth Plastic 32 oz
Nalgene Wide Mouth Plastic 38 oz
Nalgene Wide Mouth Steel 32 oz
Nalgene Wide Mouth Steel 38 oz
Nalgene N-Gen 30 oz
Nalgene OFT 32 oz
Yeti Rambler Mug 10 oz (Note: The 14oz Yeti Mug WILL NOT fit)
Yeti Rambler Mug 24 oz
Hydro Flask Wide Mouth 32 oz
Hydro Flask Wide Mouth 40 oz
Red Bull Can 8.4 oz
Owala Freesip 40oz Bottle

Car Cup Adapter for Nalgene and HyrdoFlasks (Personal Use)

96mm Car Cup Holder.stl

**Personal License**

- Full access to all of our STL files and up to **3** unique downloads per month. (16.5% cheaper than buying models separately!)
- Access to our private Discord.

**PLEASE NOTE**
This tier is for personal/home use only. You are not permitted to resell or distribute the digital STL files or 3D printed products from this tier. See model licenses for more details.

Personal Plan

We’ve been selling 3D prints on Etsy and online for 3 years and have decided to sell our models online! We are beginning to upload all the models we sell and will begin to design more. We hope to release 1 or 2 a month while we ramp up, and eventually hope to go full time to release 1 to 2 a week!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Limit3dPrinting

Achievements

Seedling

Pinned models

Car Cup Adapter for Nalgene and HyrdoFlasks (Personal Use)

Stanley64OzTumblerAdapter-Personal.stl

Xbox Under Desk Controller Stick Mount

iPhone MagSafe Dock, Phone Desk Stand, 3D Printed Globe (Personal Use Version)

AirPods Max Desk Holder with Deep Sleep Capability

Xbox Under Desk Controller Stick Mount

Stanley64OzTumblerAdapter-Personal.stl

3 Pack - Car Cup Holder Adapters for 26oz Yeti, 36oz Yeti, Nalgene, HydroFlask and More!

26oz Yeti Rambler Cap Cup Adapter (Personal Use)

36oz Yeti Rambler Car Cup Adapter (101mm Diameter) - Personal Use

Car Cup Adapter for Nalgene and HyrdoFlasks (Personal Use)