Sunflower Hueforge

*** Please follow directions carefully to have a successful print. Colors will vary based upon user.***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA Protopasta Bottle Brown Transmission Distance: 15 PLA Overture Silk Gold Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Bottle Brown At layer #7 (0.64mm) swap to Gold At layer #12 (1.04mm) swap to Yellow At layer #15 (1.28mm) swap to Jade White for the rest.