Disclaimer This file is not intended for sales. To print on bambu, or a non mmu compatable printer please follow the instructions listed below to get the best quality out of the print.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Protopasta Silver Smoke Grey Transmission Distance: 20 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Silver Smoke Grey At layer #13 (1.12mm) swap to Jade White
At layer #20 (1.68mm) swap to Red for the rest.