Star Wars Darth Vader Hueforge

*** Please follow directions below to have a successful print. Colors will vary based upon user choice.***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to White for the rest.