Peek-a-boo Zombie hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PETG JAYO White Transmission Distance: 6

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #10 (0.88mm) swap to Yellow At layer #16 (1.36mm) swap to White for the rest.