LFC Kiss of Death Hueforge

*** Please follow the instructions carefully to have a successful print. ***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Gray At layer #11 (0.96mm) swap to Gray At layer #17 (1.44mm) swap to White for the rest.