3D model designed to mount a screen lightbar on any 3D printer with V/T-slot aluminum extrusion, specially modelled for 2020 aluminum extrusions. Created to fit Quntis Monitor Light Bars.

To set up the model, you will require four M4x16 screws, two M4 T-nuts, two M4 nuts, and a Quntis Monitor Light Bar. The model's print settings are customizable to your printer's specifications. It was initially printed on a Tevo Tarantula printer using the Ultimaker Cura Slicer. The model is built for three wall perimeters at a resolution of .2mm, with an infill between 15-20% and does not require additional supports. The filament of choice was the OVERTURE PLA Filament 1.75mm, known for its high quality. 

A vital printing note is that the arm mount should be printed upright to avoid using extra supports.

**Parts Required:**
- 4 x M4x16
- 2 x M4 T-nuts
- 2 x M4 nuts 
- Quntis Monitor Light Bar:[https://amzn.to/4cUAPaR](url)

**Print Settings**
- Printer: Tevo Tarantula
- Slicer: Ultimaker Cura Slicer
- Wall Perimeters: 3
- Resolution: .2mm
- Infill: 15-20%
- Supports Needed?: No
- Filament Used: OVERTURE PLA Filament 1.75mm: [ https://amzn.to/3WiE0DK](url)

**Notes:**
- Arm mount: Printed upright, to not use supports. 


Light Bar Mount ( 2020 V/T-Slot Rails)

LIGHT_BAR_HOLDER.stl

The model is a two-part system specifically designed for mounting a dial gauge on the Tevo Tarantula Z-axis Carriage. This mount has been designed for the Neoteck DTI Digital Dial.

**Parts Required:**
- 4 x M5x12
- 4 x M5 nuts
- 4 x M3x16 (This should already be on your Printer, mounting the hotend) 
- Super Glue ( ensure nuts stay in recess on carriage mount )
- Neoteck DTI Digital Dial: [https://amzn.to/3WgbuTg](url).

**Print Settings**
- Printer:
Tevo Tarantula
- Slicer:
Ultimaker Cura Slicer
- Resolution:
.2mm
- Infill:
15-20%
- Supports Needed?:
Yes
- Filament Used: 
OVERTURE PLA Filament 1.75mm [https://amzn.to/3WiE0DK](url).

**Notes:**
- Arm mount: Can be printed on both flat sides. 
- Carriage Mount: Print on flat side

Digital Dial Mount

DIAL_HOLDER.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

LeoSpeed3D

Achievements

Trailblazer

Seedling

Light Bar Mount ( 2020 V/T-Slot Rails)

Digital Dial Mount