Small Mars Lamp 150mm for LED Lamp 001 [HiRes] [noSupports]

Mars Lamp Quick Guide

• Supports: None needed

• Print Specs:

  • ~99g of filament
  • ~9-hour print time

• Filament Recommendations:

  • Brighter, More Orange: White PLA (e.g., Sunlu)
  • Darker, Redder: Marble PLA (e.g., Overture Rock or Polymaker Marble)

• Red Light Effect:

  • Use either:
    • A red disk (53.5mm x 0.3mm) printed in PLA
    • OR an RGB LED (USB 5V RGB LED 3W) without a diffuser

• Printing Tips:

  • Print the top 10% of layers with a 0.08mm adaptive layer height for better detail
  • Manually slice the raw STL file for best quality (approx. 30 minutes)

Materials and Settings

• Filament:
  • Mars Lithophane: White or Marble PLA
  • Diffuser Disk: Red PLA
  • Disc Base: eSun eTwinkling Black
• LED Bulb: 3W or 5W (3000K)

Slicer Settings

• Lithophane:

  • Layer Height: 0.2mm
  • Top and bottom 2cm at 0.08mm layer height
  • 7 walls, 3 top/bottom layers
  • Cooling: 100%

• Disc Base:

  • Layer Height: 0.2mm
  • 4 walls, 4 top/bottom layers
  • 20% gyroid infill
  • Cooling: 100%