Tiny Vending Machine Collab with Meliora3D
Hiii!!
I'm excited to share this Collaboration with Meliora3d!! Make sure to check them out as they have a ton of fun flexi and vending machine designs!
Tiny vending machine
-
0.2 Layer Height, 3 walls, 15% Gyroid Infill
-
Brim recommended
-
Tree support “as needed”
I got my capsules from Amazon! for 100% scale vending machine you will need 1.1 inch capsules!
I found that I was able to print without supports with minor after printing clean up on the tumbler bar. If you are finding that it is not printing well without make sure to add tree supports!
the tabs under the arch on the top section of the base will need to be clipped off after printing.
Mini Sculpts
-
3 walls, 15% gyroid or 3D honeycomb infill, no supports
-
Printing the mini sculpts with 0.16 layer height or lower will improve quality
Editing 3MF
Avoid using the slicer's fill tool when coloring eyes, and eye shines in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. The rest of the parts can be painted using the fill tool and toggling the smart fill angle.
Eye shine objects can be right clicked from the object list and deleted.
Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.
The sculpts are very very small in order for them to fit into the 1.1 capsules, I don't recommend these for small children.
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌
Tiny Vending Machine Collab with Meliora3D
Strawberry Shelf
Sweet Cow Boops
Milk carton Container
Cow and Highland cow Boops
Jam clicker and paperclip
Lady bug Pixie
Gnomes with Homes
Post mark Caddy
Kitty Bookmarks
![[updated] Klickers 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fenhanced_images%2Fv1%2F9973a6b4-3ab1-4feb-8ad3-4f91fc42ad24%2FKlickers%2520(1).png&w=3840&q=75)
[updated] Klickers
.png&w=3840&q=75)
Mountain Book Tracker with Book mark
Fish Flexi
Nishi with Lillypad
Lemon Shark and Clicker
Strawberry Shark Flexi and clicker
.png&w=3840&q=75)
Blueberry Shark and Clicker
%2520(1600%2520x%2520900%2520px)%2520(3%2520x%25204%2520in).png&w=3840&q=75)
Daisy Pixie and Sunny Shelf
.png&w=3840&q=75)
Banana Bowl
.png&w=3840&q=75)
Macaw Flexi
.png&w=3840&q=75)
please add description to applying the house