Layersingreen2.2K followers

Shrimp Tank

127 downloads · 1 year ago · The tank prints in parts and then is glued together. I have put together a quick assembly video clic

This model is restricted by licensing terms.

View license.

Description

The tank prints in parts and then is glued together. I have put together a quick assembly video click below: Youtube shorts

The tank is 1:1 ratio with the shrimp. One 100% shrimp will fit into an 100% tank.

If you are using translucent filament for the tank I recommend printing with 3 walls which will avoid infill in-between the walls. All the other parts of the tank do well with 2 walls.

If you want the "glass" to be more transparent you can lower it into the bed until there's 4-5 layers only

Please pay attention as to how you are placing the substrate inside the base, as it needs to be titled downwards and then straightened out. This is shown in the assembly video!

Also take care when removing the parts of the tank from the build plate especially if it is still hot. I recommend to only flex the plate and never pull things off of it as that could cause damage to the parts.

The purple and pink tank in the pictures is 120% and the blue and black shrimp are 80%. I don't recommend printing the tank smaller than 100%

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐

🦐🦐The tank is only meant as a PROP, it does NOT represent the proper size of fish tank that live animals will require. Make sure to always research the right size of tank for healthy happy pets 🦐🦐 + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌