🕸️ Mini Spider Magnet and fly Magnet 🕸️

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• I recommend printing them with 0.16 Layer height or lower

• I used 5x2 magnets (5x3 will fit too), I buy them from amazon. CA. You can find them here - Amazon Magnets

• The magnet holes are hidden within the body of the Spider and fly and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version.

• Please note I've included a pause into the 3mf which will make the printer pause when it is time to insert the magnets. The pause will only show up when in preview mode. You will need to open the 3MF as a project for it to work. If your slice isn't showing the pause, you will need to add one manually

• Do not split into objects.

• The fly is very very small, I don't recommend printing it above 0.12 layer height.

Editing 3MF

• The 3mf models are split to parts. All the parts are located in the object list on the side panel. It is best not to color the objects manually using the fill tool and instead assign color to them from the object list to make the edges look cleaner. If a part you wish to color isn't on the object list then you can use the fill tool to color it. Do not split to objects.

• The magnets are "negative parts" in the object list, if you wish to remove them, select them from the object list, right click and choose delete

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

Spider Enclosure

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• The vines will need to be heated and bent in order to properly fit into the enclosure. Take care when using a heat source to heat the stem. Hot water can also be used to bend the stems.

• I included 3mf files for bambu studio that come with fuzzy skin preset

• Comes in two styles: Diamonds and Slits

• For assembly watch the youtube short

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌