Milk carton Container
Cute little container with a Moo tag! printed in parts and put together, can be printed without AMS by switching out colors during printing šš
Design contains Milk Carton ONLY, you can find the cows here - Cow Boops
āļøSlicer Settings
-
100% cow fits in 100% carton
-
3 walls, 15% gyroid or 3D honeycomb infill, no supports required
-
USE A BRIM for the top of the carton! I recommend inner and outer brim with 0.1 mm brim gap
-
Tested down to 60% scale. If scaling down print the top of the carton with 0.16 layer height to avoid hanging layers.
Ive included a tolerance test for the top of the carton. A tolerance test is a quick check (3 grams) to make sure the tops of the carton will be a good fit with the bottom. + + āAs with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervisionā
šThis model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click hereš
Milk carton Container
Cow and Highland cow Boops
Jam clicker and paperclip
Lady bug Pixie
Gnomes with Homes
Post mark Caddy
Kitty Bookmarks
![[updated] Klickers 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fenhanced_images%2Fv1%2F9973a6b4-3ab1-4feb-8ad3-4f91fc42ad24%2FKlickers%2520(1).png&w=3840&q=75)
[updated] Klickers
.png&w=3840&q=75)
Mountain Book Tracker with Book mark
Fish Flexi
Nishi with Lillypad
Lemon Shark and Clicker
Strawberry Shark Flexi and clicker
.png&w=3840&q=75)
Blueberry Shark and Clicker
%2520(1600%2520x%2520900%2520px)%2520(3%2520x%25204%2520in).png&w=3840&q=75)
Daisy Pixie and Sunny Shelf
.png&w=3840&q=75)
Banana Bowl
.png&w=3840&q=75)
Macaw Flexi
.png&w=3840&q=75)
African Grey Flexi
Cockatoo Flexi
Coral Sea Slug clicker
