Select a membership plan

Model is included in this plan
Available now

20% off
The Hobbyist
$7.20
/ month
when billed annually
✅ Welcome pack: 100+ FREE models

+What's included in this Tier +

⭐ Instant access to the subscriber exclusives⭐ ⭐ New monthly releases ⭐ ⭐ Previous month releases included ⭐ ⭐30% off towards archived files⭐ ⭐ My Eternal gratitude ⭐

+ Important information before subscribing +

By Subscribing to, downloading, or using any layersingreen designs, you agree to be bound by these terms and conditions

You do not get access to the full catalogue, make sure to check out posts, as well as the exclusives list before subscribing. You will have access to the exclusives, one month prior and current months releases upon subscribing

This tier does NOT carry a commercial license, subscribing to this tier does NOT give you the rights to sell prints. This tier is for those who are interested in printing for personal use only.

Absolutely NO sharing, selling, or distributing the digital files (STL or 3MF) Engaging in any of those things is ILLEGAL and will result in the appropriate consequences as well as a forever ban

Absolutely no altering, modding, or remixing my designs in any way without my express permission.

You will be charged the moment you subscribe and then on the same date monthly

Please note: unsubscribing will end your access to all current content, including the welcome pack and recent releases

Thank you for checking it out! If you have any questions please don't hesitate to reach out to me

🤍

Model is included in this plan
Available now

20% off
The Merchant
$9.20
/ month
when billed annually
✅ Welcome pack: 100+ FREE models

+ What's included in this Tier +

⭐ Commercial license ⭐ ⭐ Instant access to the subscribers welcome pack⭐ ⭐ New monthly releases ⭐ ⭐Previous month releases included⭐ ⭐30% off towards archived files⭐ ⭐ My Eternal gratitude ⭐

+ Important information before subscribing +

By Subscribing to, downloading, or using any layersingreen designs, you agree to be bound by these terms and conditions

You do not get access to the full catalogue, make sure to check out posts, as well as the exclusives list before subscribing. You will have access to the exclusives, one month prior and current months releases upon subscribing

Commercial license allows you to sell PHYSICAL prints of my designs.

Commercial license is only granted to an active paying subscriber of this tier. Unsubscribing will void your license and you will be required to stop selling immediately upon losing access to this tier.

Absolutely NO sharing, selling, or distributing the digital files (STL or 3MF) Engaging in any of those things is ILLEGAL and will result in the appropriate consequences as well as a forever ban

Absolutely no altering, modding, or remixing my designs in any way without my express permission.

Please note: unsubscribing will end your access to all current content, including the welcome pack and recent releases

Thank you for checking it out! If you have any questions please don't hesitate to reach out to me

🤍

Layersingreen
Layersingreen2.2K followers
Follow
Layersingreen
Layersingreen
|
Image 1 of 5
Holiday Ornament Sculpts 3d model
Layersingreen
Layersingreen
|
Image 1 of 5
Holiday Ornament Sculpts 3d model
Holiday Ornament Sculpts 3d model
Holiday Ornament Sculpts 3d model
Holiday Ornament Sculpts 3d model
Holiday Ornament Sculpts 3d model
Holiday Ornament Sculpts 3d model

Holiday Ornament Sculpts

This model is restricted by licensing terms. 

Today I have four ornament sculpts! these are renders of the models because unfortunately I am having some printer trouble and I didn’t want to wait until I have the printer fixed to release the models. So here we are! I did print all of the models so they have been tested however they lack in my usual quality (thanks to my unruly printer) which is why i’m using the renders.

They come in two versions, one with the loop and one without. You will also see files titled “MPM” (Multi Part Model) these models are split up when they are exported from blender which makes it easy to “paint” them for multi filament printing.

**The axolotl sculpt requires supports. I have tested this one many times while I was trouble shooting my printer. I found the supports print great with the following setting:

Cura Slicer (these are the settings I changed, everything else stays default)

Support structure: Normal

Support placement: touching build plate

Support overhang angle: 60

support density: 40

support interface density: 45

support interface pattern: concentric

Minimum support roof area: 5

Prusa slicer (changed settings)

Overhang threshold: 30

Top contact Z distance: 0.15

Make sure you select support on build plate only!

These support settings worked great for me! However please remember that every printer is different so you might need to tune your supports accordingly.


Discussions

Holiday Ornament Sculpts

97 downloads · 1 year ago in  and 
Layersingreen
Layersingreen2.2K followers
Follow
This model is restricted by licensing terms.