tracking pixel
Layersingreen

Frog Flexi

by
Layersingreen
Follow
Follow
Remix Model
Layersingreen
Layersingreen
|
Image 1 of 10
Frog Flexi 3d model
Layersingreen
Layersingreen
|
Image 1 of 10
Frog Flexi 3d model
2D
3D
Makes
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
Frog Flexi 3d model
This model is restricted by licensing terms. 

Its a chonky frog kind of day!! This release includes:

🐸 Frog Flexi 🐸 Frog Flexi Split up (body and eyes) 🐸 2 different 3MF files, white belly and spotty 🐸 3MF guide

The rainbow frogs were printed in polymaker matte rainbow, I printed a full plate to make sure I got a couple color changes at 0.16 Layer height, I believe the plate was about 250 grams or so. The green frogs are glow in the dark Bambu Labs green. the pink and blue frogs were printed in Cookiecad unicorn. The orange frogs were printed in Bambu labs orange gradient.

This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon

https://www.patreon.com/Layersingreen

As always with all designs and especially if you are using the split up version I do not recommend children under 3 handling the prints without supervision

3D printing settings Tested down to 50%, if you are having adhesion issues I recommend using a brim!

The eyes should audibly click into their place, I do strongly recommend using your glue of choice as well to make sure they stay in place. It might take a little bit of working the eye to get it to click in, if you are having a really hard time getting them in, you can sand off the edges, or reprint them at 0.5-0.1% smaller. In testing when printing a 80% scale frog, it is best to scale the eyes to 78%

Category:


1 Likes0 DownloadsSeptember 5, 2024


1 Likes0 DownloadsSeptember 5, 2024
This model is restricted by licensing terms.