🐻 Bear flexi 🐻

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• tested down to 60%

• I have included a "fuzzy" version 3MF, unfortunately it does not translate to other slicers outside of bambu studio.

Editing 3MF

• Avoid using the slicer's fill tool when coloring eyes, nose and cheeks in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. The rest of the parts can be painted using the fill tool and toggling the smart fill angle.

• cheek objects can be right clicked from the object list and deleted.

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌