Layersingreen

Select a membership plan

Monthly billing

20% off

The Hobbyist116 members

The Hobbyist

$7.20

/ month

when billed annually

✅ Welcome pack: 100+ FREE models

+What's included in this Tier +

⭐ Instant access to the subscriber exclusives⭐ ⭐ New monthly releases ⭐ ⭐ Previous month releases included ⭐ ⭐30% off towards archived files⭐ ⭐ My Eternal gratitude ⭐

+ Important information before subscribing +

By Subscribing to, downloading, or using any layersingreen designs, you agree to be bound by these terms and conditions

You do not get access to the full catalogue, make sure to check out posts, as well as the exclusives list before subscribing. You will have access to the exclusives, one month prior and current months releases upon subscribing

This tier does NOT carry a commercial license, subscribing to this tier does NOT give you the rights to sell prints. This tier is for those who are interested in printing for personal use only.

Absolutely NO sharing, selling, or distributing the digital files (STL or 3MF) Engaging in any of those things is ILLEGAL and will result in the appropriate consequences as well as a forever ban

Absolutely no altering, modding, or remixing my designs in any way without my express permission.

You will be charged the moment you subscribe and then on the same date monthly

Please note: unsubscribing will end your access to all current content, including the welcome pack and recent releases

Thank you for checking it out! If you have any questions please don't hesitate to reach out to me

🤍

Immediate access. Cancel anytime.

20% off

The Merchant176 members

The Merchant

$9.20

/ month

when billed annually

✅ Welcome pack: 100+ FREE models

+ What's included in this Tier +

⭐ Commercial license ⭐ ⭐ Instant access to the subscribers welcome pack⭐ ⭐ New monthly releases ⭐ ⭐Previous month releases included⭐ ⭐30% off towards archived files⭐ ⭐ My Eternal gratitude ⭐

+ Important information before subscribing +

By Subscribing to, downloading, or using any layersingreen designs, you agree to be bound by these terms and conditions

You do not get access to the full catalogue, make sure to check out posts, as well as the exclusives list before subscribing. You will have access to the exclusives, one month prior and current months releases upon subscribing

Commercial license allows you to sell PHYSICAL prints of my designs.

Commercial license is only granted to an active paying subscriber of this tier. Unsubscribing will void your license and you will be required to stop selling immediately upon losing access to this tier.

Absolutely NO sharing, selling, or distributing the digital files (STL or 3MF) Engaging in any of those things is ILLEGAL and will result in the appropriate consequences as well as a forever ban

Absolutely no altering, modding, or remixing my designs in any way without my express permission.

Please note: unsubscribing will end your access to all current content, including the welcome pack and recent releases

Thank you for checking it out! If you have any questions please don't hesitate to reach out to me

🤍

Immediate access. Cancel anytime.

Layersingreen2.2K followers

Follow

[Free] The Hutch video thumbnail

[Free] The Hutch 3d model

[Free] The Hutch 3d model

[Free] The Hutch 3d model

[Free] The Hutch 3d model

[Free] The Hutch 3d model

[Free] The Hutch 3d model

[Free] The Hutch 3d model

[Free] The Hutch 3d model

[Free] The Hutch

275 downloads · 10 months ago · **Hutch** find the worm magnets here - [Worm magnets](https://thangs.com/designer/Layersingreen/3d

This model is restricted by licensing terms.

View license.

Hutch

find the worm magnets here - Worm magnets find the Mushroom clickers here - Mushy clickers

3 walls, 15% gyroid or 3D honeycomb infill, no supports
Hutch tested down to 80%
To recolor the parts within this pack within the 3MF use the fill tool, and toggle the "smart fill angle" to color just the parts desired.

Book Magnet

I used 5x2 magnets (5x3 will fit too), I buy them from amazon.CA. You can find them here - Amazon Magnets
The magnet holes are hidden within the body of the book and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version
Please note I've included a pause into the 3mf which will make the printer pause when it is time to insert the magnets. The pause will only show up when in preview mode. You will need to open the 3MF as a project for it to work. If your slice isn't showing the pause, you will need to add one manually (Layer 21 for 0.2 layer height setting)

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐  + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌

Community Makes (1)

Perfect display for my growing mini collection!

Perfect display for my growing mini collection!

Community Makes (1)

Perfect display for my growing mini collection!

Perfect display for my growing mini collection!

Discussions

byfred.girlcalledfred8 months ago

Perfect display for my growing mini collection!

Perfect display for my growing mini collection! 3d model

PrinterAnkerMake M5C

Print bed sizeX: 220 mm; Y: 220 mm

MaterialPLA

Layer height0.14 mm

Infill density10 %

[Free] The Hutch

275 downloads · 10 months ago

Layersingreen2.2K followers

Follow

This model is restricted by licensing terms.

View license.