A wall clock that captures the feeling of time fading. 🕰️✨ By harnessing the natural haze of translucent PLA, this design plays with the distance between the hands and the frosted surface above them — blurring the boundary between presence and absence. As the hands drift deeper into the clock's shadow, they soften and dissolve into the depth of the piece, giving every glance a quietly different read. The inner domed curve adds another layer of subtlety: as light shifts and as you move around the room, the clock's appearance shifts with it, never quite looking the same way twice. 💡

A clean, sculptural object that brings a sense of quiet motion to any space — and a striking centerpiece for your collection, however you choose to print it. ✨🖨️✨

Assembly (as shown in the video): 🎬🔧 No additional tools, parts or glue needed.

• Simply stack all parts 📚
• Twist the top ring 🔄
• Done ✅

You can disassemble your reconfigured your Blurry at any time.

What you get: 📦 All parts as STL and a print ready .3mf file with all necessary settings.

Hardware Parts needed: 🛒

• 1× Clock Components 16mm (quartz movement, M8 thread) → Get it here ⚙️
• 1× AA battery (not included with the kit) → Get it here 🔋

Size assembled: 📏 Diamieter 212 mm x 48 mm

Print settings general: 🖨️⚙️ (All print settings are already set up in the .3mf file which comes in this package)

Required build volume: 212 x 12 x 45 mm Material usage: ~350 g PLA Estimated Print Time: ~10h (varies by printer and slicer settings) ⏱️ Material: PLA Print direction: files are rotated correctly Support: none (Custom support is already added where needed) Nozzle size: 0,4 mm Line width: 0,42 mm Layer height 0,16 mm Infill: 15% Build plate adhesion type: none

Print settings for the Transparent part only: Top surface pattern: Archimedean Cords Bottom surface pattern: Archimedean Cords Internal solid fill pattern: Archimedean Cords Spears fill in pattern: Archimedean Cords Ironing Type: Top surfaces Ironing Pattern: Concentric

For super smooth look use a smooth PEI Print plate (like this). For a more grainy look use a normal structured PEI (like that)

Everything is already setup in the .3mf file you get.

Filaments I used: 🎨

Inner Parts: Polymaker PolyTerra PLA Cotton White → Get it here

Transparent window: Elegoo Translucent PLA→ Get it here

Hands:
Sunlu Pla Plus Transparent Orange→ Get it here

Light Purple version: Polymaker PolyTerra PLA Lavender →Get it here

Mint Green version: eSun PLA Mint Green →Get it here

All links are affiliates links which give me a small commission at no additional cost to you. Thanks for support me❤️