_    “Beware; for I am fearless, and therefore powerful.”_
    ― Mary Shelley,[ Frankenstein ](https://www.gutenberg.org/ebooks/84)

 

_    “I am all in a sea of wonders. I doubt; I fear; I think strange things, which I dare not confess to my own soul.”_
    ― Bram Stoker, [Dracula ](https://www.gutenberg.org/ebooks/345)

 
_
    “There are chords in the hearts of the most reckless which cannot be touched without emotion” _
    ― Edgar Allan Poe, [The Masque of the Red Death](https://www.gutenberg.org/ebooks/2148)

 

There are both .stl files to print with manual color change at layer 2 (if you are printing at 0.2 layer height) and .3mf files to print with multi-material (already prepared for BambuLab AMS).

The bookmarks are** 35x150x0.8 mm**

I strongly suggest printing with **Arachne Wall Generator** to avoid losing details.

to obtain the best results make sure the filament you use for the text is dry and well calibrated!

 

The fonts I used are “[Evil of Frankenstein](https://www.dafont.com/it/evil-of-frankenstein.font)” by[ BrainEatersFont.com](http://www.braineaters.com/), “[Monster Mash](https://www.dafont.com/it/monster-mash.font)” by [WoodCutter](http://www.woodcutter.es/) and Franklin Gothic Medium.

Classic gothic novels bookmark collection

frankenstein  v2 bambu.3mf

The central hole is 20 mm in diameter, while the side ones are 5 mm, the plank is 100x31x7.

I also uploaded the model of the plank without holes, so if you need to you can make them any size you want directly in the slicer.

Air plant swing support 

Air Plant swing.stl

Small Decorative Vase

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6063414.

A print in place flexible version of the Abarth logo. 

The version with the hole for the magnets can hold four 5x1 round magnet stacked on each other, but i included the .f3d file if you want to modify it to fit other sizes.

Be careful if you want to size it down because i don't think the joints will be strong enough to not break if made smaller, but scaling it up should be fine.

It doesn't need supports and shouldn't need a raft (i printed it fine without it). 

Print-in-Place Flexi Abarth Scorpion (with hole for magnet!)

I designed this to organize my double pointed knitting needles by size, but it can also be used to store crochet hooks or office supplies. It has twelve outer compartments and a slightly higher and bigger one in the middle.  It can be printed without the base if you don't need it to rotate.

the outer compartments will fit a complete set of  5 dpns each (or more than one for smaller sizes) up to 6mm.

There is a version with knitting needle size debossed on each outer compartment, but I made it with the size of needles I have, you might want to personalize it with different sizes.
I also added the .f3d file if you want to modify it to fit your need.

Rotating Pen/knitting needle organizer

Plain needles organizer.stl

needles organizer with sizes.stl

A hanger to tie your cat's favorite toys under the table!


Cat Toy Table Hanger 

cat_toy_table_hanger_v3.stl

Stackable boxes made with the measurements of the average 50ml face cream jar in mind (70x70x60mm of usable space) 

If you intend to build a really high tower of these i suggest adding a few drops of glue between layers


Stackable face cream organizer 

Easy to print without supports (the angles are 45°), it can hold most contact lenses. There is a single version if you wear two identical lenses or if you want to print it in different colors for each eye. There is also a version with L and R debossed.


Contact lens holder

A pokéball shaped 45 RPM record adapter.


Pokéball 45 RPM record adapter 

A rotating teabag organizer with four compartments and a changeable cover, made to fit bags up to 80x70 mm 


Sweet dreams are made of teas 

teabag_holder_dream_cover.stl

A simple hair tie holder, easy to print and quick to resize directly in the slicer.

Hair tie holder 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Laura1207

Achievements

Seedling

Debutant

Novice Maker