The Phantom (Hueforge) (Collab with Cyanidesugar)

In collaboration with the wondrous and talented @cyanidesugar, we present to you "The Phantom".

This is a filament painting by Cyanidesugar of one of my photographs from when I was a professional photographer (BC Before Covid) for movies, tv, magazines, and art. It's a simple print, 6 filaments. Remember if you're resizing this print, DO NOT resize it on the Z dimension!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 106.64x159.96mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used PLA BambuLab Matte Charcoal Transmission Distance: 0.6 LA Chrominal Chestnut Brown Transmission Distance: 3.5 PLA Chrominal Serpent Green Transmission Distance: 8.2 PLA+ Sunlu Coffee Transmission Distance: 1.8 PLA TECOR Beige Transmission Distance: 6.3 PLA Kingroon White Transmission Distance: 5.8

This print uses 6 unique filaments

Swap Instructions: Start with Charcoal At layer #6 (0.4mm) swap to Chestnut Brown At layer #9 (0.52mm) swap to Serpent Green At layer #12 (0.64mm) swap to Coffee At layer #18 (0.88mm) swap to Beige At layer #34 (1.52mm) swap to White for the rest.