Bring some "Chonky" joy to your space! This chicken isn't just a model; it's a meticulously designed piece of art optimized for the best possible 3D printing experience.

By separating the parts, you can achieve a stunning, multi-color look with zero bleeding, even if you don't have a multi-material printer (like AMS or MMU).

**[ 📂 Included STL Files ] **Body.stl – The main "Chonky" frame.

Legs.stl – Sturdy base for your chicken.

Comb.stl – The top crown.

Eyes.stl – Designed for a perfect "pop" look.

Beak.stl – The cute little nose.

Wattle.stl – The signature detail under the beak.

Full_Chicken_OnePiece.stl – [NEW] The entire model as one solid piece for single-color printing or AMS/MMU users.

[ 🛠️ My Pro Print Settings ] I printed this on my Bambu Lab X1-Carbon to achieve a retail-quality finish:

Resolution: 0.08mm (Extra Fine) – For that smooth, injection-molded feel.

Walls: 3 Loops – Ensures strength and a flawless surface.

Infill: 5% Honeycomb – Lightweight but structurally sound.

Supports: * For Multi-Part Kit: Minimal. Only required at the base of the body.

For One-Piece File: Required under the base and under the wings to ensure a clean print.

[ 🧩 Assembly Instructions ] This is a Glue-up assembly kit (unless printing the One-Piece file):

Each part has its designated spot.

Apply a tiny drop of Super Glue to the Legs, Eyes, Beak, Comb, and Wattle.

Press into the Body for 10 seconds.

****Optimized for Bambu Lab Users: 🚀 ****In addition to the STL files, I have included .3mf files specifically for Bambu Studio users. These are pre-configured with the ideal orientation and print settings, so you can just drag, drop, and start printing immediately!

Tip: Use a glossy filament for the eyes to make them look alive!

[ 💖 Support My Work ] If you love this design, please share your makes! I’d love to see your "Chonky" creations in different colors. Don't forget to follow for more upcoming designs!