**Ready and Painted for Multicolor printers !!!
Print in Place no Supports Required**

Glower Mean Ghost / Print in Place // La Calavera licensed toy

Glower Mean Ghost the name and distinctive likenesses are trademarks of La Calavera.
**
It works on Filament & Resin. / Can be scaled up and down**

Don't add extra supports to the files, they are not needed and it will cause troubles.

**This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing to our Thangs account**

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :

Instagram - https://www.instagram.com/la.calavera.3d.print/

3D PRINTING SETTINGS
Primary Layer Height = 0,1600 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2 / 3

Temperature= 215 C / 205 (it's up to you)

Default Printing Speed= 70,0 mm/s

Infill Percentage= 12% (or more, it's up to you)

Glower Mean Ghost

Glower Mean Ghost.3mf

**Ready and Painted for Multicolor printers**

Grumpy Face Alien / Print in Place // La Calavera licensed toy
Grumpy Face Alien the name and distinctive likenesses are trademarks of La Calavera.

**It works on Filament & Resin. / Can be scaled up and down**

Just Slice and Print, No Supports Required

**This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing and remain subscribed to our Thangs account**

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :

Instagram - https://www.instagram.com/la.calavera.3d.print/

3D PRINTING SETTINGS

Primary Layer Height = 0,16 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2

Temperature= 215°C

Default Printing Speed= 70 mm/s

Infill Percentage= 12% (or more, it's up to you)

Grumpy Face Alien / print in place

Grumpy Face.3mf

**Ready and Painted for Multicolor printers** 

King Dracula / Print in Place // La Calavera licensed toy
King Dracula the name and distinctive likenesses are trademarks of La Calavera.

**It works on Filament & Resin. / Can be scaled up and down**

Just Slice and Print, No Supports Required

**This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing and remain subscribed to our Thangs account**

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

**Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :**

Instagram - https://www.instagram.com/la.calavera.3d.print/

**3D PRINTING SETTINGS**

Primary Layer Height = 0,16 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2

Temperature= 215°C

Default Printing Speed= 70 mm/s

Infill Percentage= 12% (or more, it's up to you)

King Dracula

King Dracula.3mf

**Ready and Painted for Multicolor printers** 

Raptorian Rexor / Print in Place // La Calavera licensed toy
Raptorian Rexor the name and distinctive likenesses are trademarks of La Calavera.

**It works on Filament & Resin. / Can be scaled up and down**

Just Slice and Print, No Supports Required

**This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing and remain subscribed to our Thangs account**

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

**Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :**

Instagram - https://www.instagram.com/la.calavera.3d.print/

**3D PRINTING SETTINGS**

Primary Layer Height = 0,16 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2

Temperature= 215°C

Default Printing Speed= 70 mm/s

Infill Percentage= 12% (or more, it's up to you)

Raptorian Rexor

Raptorian Rexor.3mf

**Ready and Painted for Multicolor printers** 

Skull Guy Grimmy / Print in Place // La Calavera licensed toy
Skull Guy Grimmy the name and distinctive likenesses are trademarks of La Calavera.

**It works on Filament & Resin. / Can be scaled up and down**

Just Slice and Print, No Supports Required

**This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing and remain subscribed to our Thangs account**

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

**Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :**

Instagram - https://www.instagram.com/la.calavera.3d.print/

**3D PRINTING SETTINGS**

Primary Layer Height = 0,16 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2

Temperature= 215°C

Default Printing Speed= 70 mm/s

Infill Percentage= 12% (or more, it's up to you)

Skull Guy Grimmy

Skull Guy Grimmy.3mf

**Ready and Painted for Multicolor printers**

Bluey the Shark / Print in Place // La Calavera licensed toy
Bluey the Shark the name and distinctive likenesses are trademarks of La Calavera.

**It works on Filament & Resin. / Can be scaled up and down**

Just Slice and Print, No Supports Required

**This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing and remain subscribed to our Thangs account**

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

**Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :**

Instagram - https://www.instagram.com/la.calavera.3d.print/

**3D PRINTING SETTINGS**

Primary Layer Height = 0,16 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2

Temperature= 215°C

Default Printing Speed= 70 mm/s

Infill Percentage= 12% (or more, it's up to you)

Bluey the Shark

Bluey the Shark.3mf

**Ready and Painted for Multicolor printers !!!
Print in Place no Supports Required**

Pixel Mini Bot / Print in Place // La Calavera licensed toy

Pixel Mini Bot the name and distinctive likenesses are trademarks of La Calavera.

It works on Filament & Resin. / Can be scaled up and down

Don't add extra supports to the files, they are not needed and it will cause troubles.

This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing to our Thangs account

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :

Instagram - https://www.instagram.com/la.calavera.3d.print/

3D PRINTING SETTINGS
Primary Layer Height = 0,1600 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2 / 3

Temperature= 215 C / 205 (it's up to you)

Default Printing Speed= 70,0 mm/s

Infill Percentage= 12% (or more, it's up to you)

Pixel Mini Bot Print in Place

Pixel Mini Bot.3mf

Ready and Painted for Multicolor printers !!!

**Print in Place no Supports Required**

 Lumi Cute Ghost / Print in Place // La Calavera licensed toy
Lumi Cute Ghost the name and distinctive likenesses are trademarks of La Calavera. 

** It works on Filament & Resin. / Can be scaled up**

 Don't add extra supports to the files, they are not needed and it will cause troubles.

 This Design is protected by copyright Law. When you download, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial license to sell Physical Prints by subscribing to our Thangs account

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :


Instagram - https://www.instagram.com/la.calavera.3d.print/

3D PRINTING SETTINGS


Primary Layer Height = 0,1600 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2 / 3

Temperature= 215 C / 205 (it's up to you)

Default Printing Speed= 70,0 mm/s

Infill Percentage= 12% (or more, it's up to you)

Lumi Cute Ghost

Lumi.3mf

**Ready and Painted for Multicolor printers !!!
Print in Place no Supports Required**

Baby Rhino / Print in Place // La Calavera licensed toy

**Baby Rhino the name and distinctive likenesses are trademarks of La Calavera.**

It works on Filament & Resin. / Can be scaled up

Don't add extra supports to the files, they are not needed and it will cause troubles.

This Design is protected by copyright Law. When you purchase, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial licence to sell Physical Prints by subscribing to our Thangs account

You can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it faster

Feel free to share your makes on this page, i would love to see them or you can tag me on my socials here :

Instagram - https://www.instagram.com/la.calavera.3d.print/

3D PRINTING SETTINGS

Primary Layer Height = 0,1600 (mm)

Top Solid Layers= 9

Outline/Perimeter Shells= 2 / 3

Temperature= 215 C / 205 (it's up to you)

Default Printing Speed= 70,0 mm/s

Infill Percentage= 12% (or more, it's up to you)

Baby Rhino / Little Wonders

Baby Rhino.3mf

Here you will find our licensed designs for Personal and Comercial use, you will have the rights to distribute and sell physical printed copies from our own copyrighted printable figurines

Little Wonders

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

La calavera

Select a membership plan