Hi all,
i'm back with a wall art wit open top layer design. This desings are made for printing on all printers.
More of this Pokémon hexagon are coming soon.
Bambu Studio orcaslicer - Instruction for the open top layer: The screenshots are from a other model but the steps ar the same (attached PDF), only some parameters changes. (the setting are set in the 3mf)
-In global tab choose the Octogram Spiral infill en enable supports -Go the the object tab; i used the Height range modifier (Right click on the object in the object tab) That way Pikachu have closed top layer
Choosing other infill is also possible (Archimedean Chord did'nt work for me)
Set the layes you want to change; in this case it's 0 to 15 mm
In the object tab set top layers to 0 and infill to Octogram Spiral
Dont forget to do the color swaps. PAY ATTENTION IF YOU USE 1 AMS; This is a 5 color print, if you have one AMS, you need to swap a spool during print. Best is to choose black and set the color red on the same slot of black. Swap when black is finished
Start with Lightblue at layer 75 change to black at layer 79 change to Lightblue at layer 82 change to Green at layer 85 change to white at layer 88 to Red at layer 91 to white
Have fun printing, and don't hesitate to share your makes.
Also go check my other models.
COMMERCIAL USE - Take a membership For personal: https://makerworld.com/en/@Kevyn3D