Gridfinity Divider Bins - comprehensive height options
2.5K downloads · 4 years ago · A comprehensive assortment of Gridfinity divider bins based on the OpenSCAD implementation of Zack's
A comprehensive assortment of Gridfinity divider bins based on the OpenSCAD implementation of Zack's original design. The parent project is located here: https://github.com/vector76/gridfinity_openscad. This implementation corrects several deficiencies with Zack's original F360 model.
The modelset includes all width & depth permutations between 1u & 5u. Within each, I've included multiple heights: [2u, 3u, 4u, 5u, 6u, 7u, 8u, 10u, 12u]. 6u is the standard.
These models have all been parameterized to contain at most a 2u label shelf that is centered on the bin. If these choices don't suit you, you can always grab the OpenSCAD model and parameterize the model yourself. It only takes about five minutes to learn if you've never used it.
Gridfinity Divider Bins - comprehensive height options
2.5K downloads · 4 years ago in and
More Gridfinity Divider Bins
Gridfinity bin 2x2x12 hex (optional insert)
Gridfinity Divider Bins
Hex Bin Gridfinity 2x4x5 DIVIDED
Vertical Gridfinity Dividers Bins
Hex Bin Gridfinity 2x3x5 Divided x2
Gridfinity Divider Bins Remix
Gridfinity Window Divider Bin - no tape
Gridfinity Window Divider Bin Locking Top - No Tape, No Glue
Gridfinity Window Divider Bin
Gridfinity Divided Plain Bins
Hex Bin Gridfinity 2x3x5 DIVIDER
Gridfinity Window Divider Bin Top No Tape No Glue
Gridfinity-4X2 Divider bin
Simple 3x3 6U Gridfinity bin with dividers
Gridfinity Hex Bin 1x4 Divided
Gridfinity Vase mode divided bin with magnets.
Gridfinity bin 3x2x12 hex (optional insert)
Gridfinity bin 1x3x12 hex (optional insert)
I downloaded OpenScad, but not sure how to open the model. Where can I find the OpenSCAD file for the model(s)? thanx
Exactly what I was after! 1x1x5u. I tried Zacks 360 model and was getting errors all over the place. Cheers
Also just tried your OpenScad model, very cool! Having the ability to adjust the lip size, floor thickness, magnets or no magnets is extremely useful. Also appreciate that you put comments in for what Zack used for most parameters. Thanks!