Designed for the MetroVac DataVac Series ESD Safe Canister Vacuum DV-3-ESD1. It should also fit the DataVac Pro Series 2 & 3, and other canister vacuums with a 510mm circumference.

Print In Place hinge design. You'll need 2 brackets for the vac, and 2 wall mount brackets if you plan to wall mount the unit

Prints to canister OD when closed. For tighter fit downscale by 0.5% or use a couple strips of thin adhesive backed rubber or silicone on the inside of the ring. It is designed to use the strips as it helps prevent marring of the surface finish of the vacuum

Hardware:

2x M4 Button Head screw

2x M4x6x6 Heatset Insert

Up to 3 M4 or 3/16" screws as conditions dictate per wall mounting bracket