With this tier you get:

- License to sell 3D prints of my models.
- Full access to exclusive members-only models.
- Monthly updates with new designs tailored for enthusiasts and professionals.
- Priority support and feedback opportunities on upcoming projects.


Thanks for your support! 

Jt40 MAKER

FOLDX - Foldable Multi-Tool -  Basic Kit 
 No Screws, No Supports.

I first designed this as a foldable utility blade holder with inspiration from the classic Swiss knife folding mechanism.  I then created other tool head options using the same body.

 The assembly process is easy—just print the parts, snap the interior pieces together, and close the shell. It’s quite secure on its own, but if you want extra confidence, add a small dab of superglue on the shell’s contact points.

Printed in PLA, it's perfect for light-duty usage, like desk or office tasks. If you're planning on heavier duty use, you might want to experiment with different materials.

I've been giving away a bunch of these to friends and family, and they all really enjoy them—especially for keeping at their desks for quick tasks.

Included :
-Single tool-head holder.
-Utility Blade Holder: Compatible with standard utility blades (Stanley 1992)
-Short Utility Blade Holder: Fits smaller "D" shaped utility blades
-Soft Saw Head
-Bottle Opener Head
-Box Opener Head
-Comb Head
**-Template Head: Use it to make your own tool head!** 

If you like this project, please follow me & check tmy other models for additional accessories compatible with this tool.



Please note: This model is for personal use only and is not intended for commercial purposes unless an active commercial license is purchased.

FOLDX Basic Kit - Customizable Foldable Multi-Tool 

Knife_SHELL_1.stl

Foldable_Knife_Box_Opener_Head.stl

Foldable_Knife_Bottle_Opener_Head.stl

Knife_Spring_Without_Clip.stl

Foldable_Knife_Comb_Head.stl

Knife_Spring_With_Clip.stl

Foldable_Knife_Soft_Saw_Head.stl

Foldable_Knife_Utility_Blade1.stl

Foldable_Knife_TEMPLATE.stl


This is an ergonomic utility blade holder modeled to fit a standard Stanley blade. It does not need screws as the head of the holder has a small latch that bends down allowing to slide in the blades. Light duty use only.

Prints in 3 pieces as pictured and snaps together by contact, you can put a tad of glue in the holder to secure everything in place. No supports needed. Make sure you have a good first layer so that the blade holder latch does not fuse. My slicer makes a 0.5 width first layer by default so i changed it to 0.42 and the clearence is perfect.  Use extra walls and  over 25% infill to have a firm piece.

Update: Added 2 sheath options; lid only cover & belt clip holster;

Ergo Utility Knife/Blade Holder w/sheath

sheath.stl

sheath beltclip.stl

Grip (2).stl

Middle (1).stl

This is an alternative shell/scales for my 3d printable foldable multi-tool. You can download the spring and tool-heads to make your own here:
 [FOLDX basic ](https://thangs.com/designer/Jt40/3d-model/FOLDX%20Basic%20Kit%20-%20Customizable%20Foldable%20Multi-Tool%20-1149942
)

This version holds a single tool head and features a grip-shaped design for enhanced ergonomics and ease of handling.

**Assembly Instructions**

The assembly process is straightforward: simply print the parts, snap the interior pieces together, and close the shell. It’s secure as is, but for added confidence, you can apply a small dab of superglue at the shell’s contact points.

**If you enjoy this project, please consider following me and checking out my other models for additional compatible accessories.**

_Note: This model is intended for personal use only and is not for commercial purposes unless you have an active subscription to a commercial license._

FoldX - Foldable multi-tool - Grip Shell

FoldX-Grabshell-Lid.stl

FoldX-Grabshell-Singlemount-.stl

Foldx- 3d printable foldable multi-tool

Foldx is a 3d printable foldable multi-tool inspired in the swiss army knifes. You can mix different parts of this kits to make your own every day carry foldable tool.** You can find the rest of the parts to complete this print in my profile; springs, single-tool holders and tool-heads **

This upload includes:

Double tool holder
Divider
Triple tool holder
Shell lid


Please consider following me & check my other models and remixes to download compatible tool-heads, springs  & accessories. Some pictured tool-heads are still not available but will be soon!

_
Please note: This model is for personal use only and is not intended for commercial purposes unless you have an active subscription to a commercial license in my Thangs Subscription Tier.
_

FoldX - Foldable multi-tool -Double and Triple tool-head holder

FOLDX - Divider.stl

FOLDX - Double Tool-head Holder.stl

FOLDX - Shell lid.stl

FOLDX - Triple Tool-head Holder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Jt40

Achievements

Seedling

Debutant