tracking pixel
John U

Raspberry Pi 4 B SSD & 30mm Fan Case

by
JohnU
Follow
Follow
Remix Model
JohnU
JohnU
|
Image 1 of 8
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
JohnU
JohnU
|
Image 1 of 8
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
2D
3D
Makes
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
Raspberry Pi 4 B SSD & 30mm Fan Case 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6220795.

This Raspberry Pi 4 case was designed with the goal of housing an SSD SATA drive and a 30mm x 30mm x 7.6mm PWM fan. I like running SSDs on my Raspberry Pi(s) that I have critical services running on like my MQTT broker and OpenVPN server because they are way more reliable than MicroSD cards.

<b>There are two versions of the top, one with access slots and one without.</b>

ADDITIONAL STUFF YOU WILL NEED:

SSD/NAND SATA III 6Gb/s 2.5" 7mm Internal Solid State Drive

USB 3.0 or 3.1 Type A to SSD/2.5 Inch SATA Hard Drive Adapter (I used a SABRENT branded one, and the Pi 4 can only support up to USB 3.0)

5V Fan 30mm 3 Pin PWM (I used the KKSB branded one on Amazon.com)

Scotch SP951-NA Bumpers and Door Stops, 1/2" Round, Clear (4) (stick to bottom of case)

M3 Tap & Plastic safe cutting Oil (I used Super Lube Oil with PTFE)

12 x M3 screws. (I used 8 dome head PC HD screws and 4 M3x6mm Pan head screws to mount the Pi)

A set of heat sinks designed for the Raspberry Pi 4b.


1 Likes15 DownloadsSeptember 16, 2023


1 Likes15 DownloadsSeptember 16, 2023
This model is restricted by licensing terms.