LG UltraGear Monitor Stand Topper Bracket for Camera or Light

I bought an LG UltraGear QHD 34-inch curved gaming monitor on black Friday in 2023, but quickly realized that I needed a way to mount the ring-light I use for Zoom calls to it.

I use this bracket to hold a cheap ring light I bought off Amazon and mounted it right to the top of the monitor stand to save some of the desk space.

This design does a decent job of mimicking the tricky angles at the top of the monitor stand and acts as a sort of "hat" with a hollow stem. I used a standard screw I had on hand to attach the base of the light to the stem.

Since the monitor moves up and down, it's handy to be able to swing the light out of the way.

Use this at your own risk! My ring light is quite light, so though you could mount a heavy digital camera to it, that's probably not a good idea, but that's up to you.

Printed in PETG 15% infill Prusa MKS+ Support material over the bed only--I didn't try printing this without supports. It's a bit of a pain getting the support material out of the interior of the bracket so if you don't want supports you could print it with the stem down and see what happens. Maybe use a brim to keep it from falling over. Up to you!