For Instructions Download the:
The GEN2 Tilt drawer is a heavy duty storage solution with incredibly quick and easy access to it's contents thanks to it's tilting opening. Rearrange the tilt drawers in seconds now thanks to the new QuickLock spring mechanism integrated into the drawer case.
This drawer pairs nicely with the following models:} • GEN2 Drawers - Medium • GEN2 Slim Drawers - Medium • GEN2 Table Top Kit - Medium
FUNCTIONS • WALL MOUNT - This is the first and only model in the GEN2 storage system to feature direct mounting to the wall! I've tested multiple prototypes to ensure it is able to hold serious storage contents such as metal bolts and screws.
• TABLE TOP KIT - Place the storage on any surface in combination with any other GEN2 Medium model such as slim drawers. Download the table top kit HERE
• UNDER TABLE - Store under any table, desk, or workbench. Simply screw the GEN2-QL Medium Rails under any surface and slide the drawer case in place, lock it in place using the GEN2 QuickLocks.
HARDWARE/TOOLS • Screw Driver • Wood Screws #8, 1.5" long or equivalent • M3x6 or longer machine screw
INSTRUCTIONS
PREP THE TILT DRAWER The New design of the drawers rely on using an M3 screw head to pivot on. This is significantly more stable and structural strong compared to previous designs.
• Inside the drawer pull M3 nuts into place, you may want to use a longer screw such as an M3x10 and then removing the screw
• Now thread an M3x6 (or longer) into place on each side of the tile drawer
WALL MOUNT • Decide where to wall mount the storage units, I recommend starting near chest level to easily see in the drawers when opened, and more drawers can always be added to it. For best support locate a wall stud or use decent wall anchors.
• Using the two top holes on with the case against the wall I recommend marking their location using a pencil, you can also pull the case away from the wall and verify the 2 marks are level.
• Depending on your wall type you can predrill or screw in the #8 or equivalent wood screws. Leave the screws slightly loose out from the wall.
• Now's a good time to add a cover (GEN-QL Cover - Single - MEDIUM) from the GEN2 Table Top Kit - Medium. Slide the case holes over the screws and let them slide downward until they are fully seated in the slot, you can not gently tighten the screws the rest of the way.
• You can now add any type of GEN2 Medium storage unit under this drawer case.
• For more permanent or more secure mounting to the wall you can add optional screws in the single center screw hole on one of the lower positioned cases.
TABLE TOP KIT • See video for instructions
UNDER TABLE • See video for instructions
Extra Features • Use the GEN2 QuickLock - Bidirectional to install the Medium drawer under longer drawer cases. When sliding the drawer into place you will need to help the bidirectional QuickLock by holding them down until they are started under the slot of the drawer or rail above.