tracking pixel
Joey G

GEN2 Decor - Faceplate - EdgeMetal

by
Jerrari
Follow
Follow
Remix Model
Jerrari
Jerrari
|
Image 1 of 6
GEN2 Decor - Faceplate - EdgeMetal 3d model
Jerrari
Jerrari
|
Image 1 of 6
GEN2 Decor - Faceplate - EdgeMetal 3d model
2D
3D
Makes
GEN2 Decor - Faceplate - EdgeMetal 3d model
GEN2 Decor - Faceplate - EdgeMetal 3d model
GEN2 Decor - Faceplate - EdgeMetal 3d model
GEN2 Decor - Faceplate - EdgeMetal 3d model
GEN2 Decor - Faceplate - EdgeMetal 3d model
GEN2 Decor - Faceplate - EdgeMetal 3d model
This model is restricted by licensing terms. 

For Instructions Download the:

GEN2 Interactive Catalog Download

The EdgeMetal Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.

The EdgeMetal series has a strong sharp look unlike anything else. Printed in a highly reflective filament, the angled corners generate an striking appearance. Print as one solid color or experiment with multicolor printing for some really fascinating results.

What You'll Need

BASE DRAWER MODELS • GEN2 Decor Drawers - Standard - DOWNLOAD

HANDLE/KNOBS • BlockBar Series - DOWNLOAD • Crystal Series - DOWNLOAD

HARDWARE Includes affiliated links to help support my projects • Filament - Silk Silver PLA (this is what I used in many of my photos) • M3 nuts and screws: M3x6 - M3x10- I prefer this kit

INSTRUCTIONS • Print the model laying face up, no supports needed • Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.


4 Likes5 DownloadsSeptember 7, 2024


4 Likes5 DownloadsSeptember 7, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo