GEN2 270 Decor Drawer - Quick Start

The GEN2 270 Decor Drawer is part of the GEN2 QuickLock Modular System. This Quick Start covers the essentials. A detailed video walkthrough is coming soon - for now, the full step-by-step guides live on JERRARI3D.com.

What You'll Need

Required

• GEN2 270 Case (matching size)
• GEN2 Decor Faceplate (Matching drawer width and height)
• Filament: PLA works great for most parts; PETG for stronger, more durable builds

Optional

• Magnets (10×2mm or 6×2mm) for soft-close on select configurations
• Printed clips - secures faceplate to drawer, no hardware needed (Included with certain faceplates)
• M3 screws - only if you prefer fasteners over the included printed clips, or are using older v2508 faceplates

Full compatibility list: JERRARI3D.com/gen2-modular-system

Print Notes

• No supports required.
• Drawer bodies print great in PLA - save your premium filaments for the faceplates.
• For larger drawers near the edge of your build plate, clean the sheet with detergent or 99% ISO alcohol to prevent edge curl.

Assembly Overview

1. Print the drawer body: No supports, no hardware needed.

2. Attach the faceplate: Snap the printed clips into the drawer's front interface, then press the faceplate into place. The compliant mechanism holds it firmly - no M3 screws needed.

3. Install in case: Slide the drawer into a GEN2 Case (under-table rail, tabletop kit, or wall mount). QuickLock locks everything in place.

Full Step-by-Step Guides

Detailed walkthroughs (with video) on the GEN2 Instruction Hub:

• Under-Table Rail Installation
• Tabletop Kit Assembly
• Wall Mount Installation
• Decor Faceplate Installation
• Open Bin Drawer Assembly
• Creating GEN2 Labels

A dedicated GEN2 Decor Drawer video walkthrough is in production - check back soon.

Support the Project

Premium faceplates, early access models and Original STEP and CAD files. Every download and purchase helps fuel future GEN2 designs.