Jeandre G

Customizable Empty Spool Lamp

by
Jeandre Groenewald
Follow
Follow
Remix Model
Jeandre Groenewald
Jeandre Groenewald
|
Image 4 of 4
Customizable Empty Spool Lamp 3d model
Jeandre Groenewald
Jeandre Groenewald
|
Image 4 of 4
Customizable Empty Spool Lamp 3d model
2D
3D
Makes
Customizable Empty Spool Lamp 3d model
Customizable Empty Spool Lamp 3d model
Customizable Empty Spool Lamp 3d model
Customizable Empty Spool Lamp 3d model
This model is restricted by licensing terms. 

I wanted a way to reuse my empty filament spools, and that's when I came up with this design.

  

The design is customizable. I have included OpenSCAD scripts to customize the lamp components for spools with an outer diameter of 190mm–205mm and an inner diameter of 50mm–60mm. You can customize the socket_holder to fit your light bulb socket. One of the photos shows the dimensions of the bulb you will need.

  

The included files are for a spool with an inner diameter of 54mm and an outer diameter of 200mm. You will need a 300x300mm print bed to print the hexagons. Make sure to have the .scad files in the same folder.   

3D PRINTING SETTINGS  

I have included pdfs with print instructions, instructions to customize your own top cap and lithophane, and instructions on how to assemble the lamp.

  

Thank you for supporting my design. I really appreciate it.


42 Likes47 DownloadsJuly 30, 2023



42 Likes47 DownloadsJuly 30, 2023
This model is restricted by licensing terms.