tracking pixel
PJ

Lidl Glider Pusher Power Pod

by
Jangy
Follow
Follow
Remix Model
J
Jangy
|
Image 1 of 21
Lidl Glider Pusher Power Pod 3d model
J
Jangy
|
Image 1 of 21
Lidl Glider Pusher Power Pod 3d model
2D
3D
Makes
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
Lidl Glider Pusher Power Pod 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5548980.

Lidl Glider Pusher Power Pod

Designed for 12 x 12 mm M2 hole mount. I used a Racerstar Racing Edition 1806 motor with a 4" prop.

Designed to be printed with no supports. To make it stronger, print at a higher temperature. V2 is for motors shaft that stick out past the motor base.

For the 12 x 16 mm mount https://www.thingiverse.com/thing:5585789

For the 16 x 19 mm mount https://www.thingiverse.com/thing:5624386

My set-up 3S 1000mah lipo 3 x 5 gram servos 3 bladed 4 inch prop Racerstar Racing Edition 1806 75 watts at full power 25a ESC All up, weight 320g

Flight video https://youtu.be/dKA-KWGKGeA


2 Likes6 DownloadsJuly 11, 2023


2 Likes6 DownloadsJuly 11, 2023
This model is restricted by licensing terms.