Edgar and crow

One of my favorite HF pieces so far, the one and only Edgar Allan Poe.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions: Start with Charcoal At layer #13 (1.2mm) swap to Dark Blue At layer #18 (1.6mm) swap to Gray At layer #23 (2mm) swap to Ivory White for the rest.