Simple. Elegant. Profitable.

Transform your 3D printer into a lighting factory with the Nuvia Lamp - featuring ingenious snap-fit mechanical assembly with zero screws, glue, or hardware beyond the standard E27 bulb socket.

WHY MAKERS LOVE THIS DESIGN

• ONLY 3 PARTS: Base + Lampshade + Coupler
• SNAP-FIT ASSEMBLY: Mechanical tuck-in design holds everything securely
• NO GLUE, NO SCREWS: Clicks together in 30 seconds
• NO SUPPORTS NEEDED: Optimized print orientation
• STANDARD E27 SOCKET: Available everywhere for $3-5
• BEGINNER FRIENDLY: Your first functional print success guaranteed
• TESTED DESIGN: Proven mechanical strength and stability

ASSEMBLY SYSTEM - THE MAGIC

Mechanical Tuck-In Snap-Fit Design:

1. Insert E27 socket through base from bottom
2. Place lampshade on top
3. Snap coupler ring over assembly - locks everything tight
4. Done! No tools, no adhesives, no hardware store runs

Why This Matters:

• Fast assembly = More units per hour for sellers
• Strong and secure = No wobbling, professional quality
• Easy disassembly = Replace bulbs, ship flat, reuse parts
• Foolproof design = Customers can assemble themselves

Engineering Highlights:

• Precision tolerance snap-fit mechanism
• Stress-tested interlocking geometry
• Cable pass-through designed into base
• Coupler applies even pressure for tight seal

PRINT SPECIFICATIONS

Part Breakdown:

PART 1: BASE

• Function: Socket holder + stability platform
• Print Time: Approximately 2-3 hours
• Infill: 20 percent
• Supports: NONE
• Orientation: Flat on build plate
• Features: Integrated cable management channel

PART 2: LAMPSHADE

• Function: Light diffusion + aesthetic design
• Print Time: Approximately 3-4 hours
• Infill: 5-10 percent for strength
• Supports: NONE
• Orientation: Upright as designed
• Pro Tip: white PLA for best glow

PART 3: COUPLER RING

• Function: Locks shade to base via snap-fit
• Print Time: Approximately 30-45 minutes
• Infill: 25-30 percent - needs strength for snap mechanism
• Supports: NONE
• Orientation: Flat on build plate
• Critical: Print with good layer adhesion for snap durability

RECOMMENDED PRINT SETTINGS

Layer Height: 0.2mm standard or 0.16mm high quality Nozzle Temp: 200-220C for PLA, 230-250C for PETG Bed Temp: 60C for PLA, 80C for PETG Print Speed: 50-80mm/s Wall Lines: 3 for base and coupler, 2 for [shade](https://[url