Modular Hextraction Single Goal

Modular Hextraction Combined Goals There have been a few request for this so here it is!

This combines the 3 separate goals in the original modular hextraction to be more like the original board.

Print Settings: Best printed in its current orientation. Will need supports only for the threaded area in the air where it connects to the rest of the board.

I printed everything with PLA+ with 2 perimeters, 0.2mm layer height. 15% infill, 5 top and bottom layers.

-- Thanks:

If you're feeling generous my Paypal donation link is below, and will be used to buy more filament. Anything would be greatly appreciated!

Thanks to Zack and his original design of the Hextraction board game it’s heaps of fun!