10 Likes25 DownloadsJuly 23, 2024
Description: The design of the lampshade was inspired by a pineapple and while it initially was more organic in shape, I switched gears and made it rougher and sharper. This gives the overall design more character and, as I discovered later, the shadow plays are fantastic! Happy printing!
**Dimensions: **
- Lampshade - diameter ~265mm, height ~280mm
- Structure (printed flat) ~260x206mm
- Light socket support hole 40mm (E27)
Print Settings Printed it on Anycubic Chiron from generic white PLA
- Vase Mode with 0.8mm Nozzle and 0.3 layer Height and 0 bottom layers.
- If you print with smaller nozzles, try to play with the extrusion multiplier to over-extrude and make it stronger. The structure is printed separately and glued together at the end with superglue. Please see the Assembled step file to check the exact position of the glued pieces.
This work by ImprovedByDesign is licensed under CC BY-NC-SA 4.0
Categories:
10 Likes25 DownloadsJuly 23, 2024
10 Likes25 DownloadsJuly 23, 2024