6 Colour ‘filament painting’ model, Op art Bear Portrait
(I recommend the following max speed settings, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s)
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA Esun PLA+ Brown Transmission Distance: 1.5 PLA Sunlu PLA+ Coffee Transmission Distance: 3 PLA Sunlu PLA+ Orange Transmission Distance: 8 PLA Sunlu PLA+ Pure Yellow Transmission Distance: 5 PLA Sunlu PLA+ White Transmission Distance: 6
Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Brown At layer #14 (0.68mm) swap to Coffee At layer #18 (0.84mm) swap to Orange At layer #20 (0.92mm) swap to Pure Yellow At layer #21 (0.96mm) swap to White for the rest.