Poker Cards Magnetic Fidget Toy

Your go-to solution for one-handed relaxation and entertainment. Crafted for seamless play with just a single hand, this innovative gadget combines the classic appeal of poker cards with the soothing motions of a fidget toy.

It has been designed to have magnets hidden inside each card.

With just a flick of your wrist, you can effortlessly perform mesmerizing tricks—spin one card around the other, seamlessly separate them, and watch as they magically reunite, thanks to the powerful magnetic force.

INSTRUCTIONS:

-You will need 2x Neodymium 30x10x3mm magnets, you can find these for cheap from Temu or Amazon. -Add a pause at 3.6mm layer height (Or use the Factory Files if you have a Bambu Labs 3D Printer) then insert the magnets. "Keep in mind the magnets should be placed with the same polarity facing down. Check out the instructions video. -Once you insert the magnets, just press print and it will finish printing with the magnets inside.

UPDATE:

I have added a version with an extra layer on top and the bottom of the magnet, as some colors will show the magnet through and also added blank cards so you can add your own logos or remix it.

Instructions video on Tiktok

"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."

3D PRINTING INSTRUCTIONS: -0.2mm Layer height, 50% infill and 3-4 at least. The more infill the better to make them as heavy as possible. -If you are using a Bambu Labs 3D Printer just use the Factory File (FF BS) -If you are not using a Bambu Labs 3d Printer, choose between colored or single color file, then add a stop at 3.6mm height so you can add the magnets.