tracking pixel
Ivan K

Octopus Tentacle Wine Bottle Holder / No Supports

by
IK3D
Follow
Follow
Remix Model
snakester15
snakester15
|
|
Image 15 of 17
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
snakester15
snakester15
|
|
Image 15 of 17
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
2D
3D
Makes
instagram-play
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports - Printed beautifully with black isanmate pla and eryone dual purple/black silk. Came out amazing! - 3d model
Octopus Tentacle Wine Bottle Holder / No Supports - Eryone Teal and Burnt Orange - 3d model
Octopus Tentacle Wine Bottle Holder / No Supports - Bambu silk dual blue and red with rosa silk copper. - 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports 3d model
Octopus Tentacle Wine Bottle Holder / No Supports - IF YOU USE THE 3MF MAKE SURE THE SCALE IS 108. I scaled it down to make a test print and then just set it back to 100 and it was too small for a wine bottle (although it fits Bacardi perfectly.) This isn't an issue with the STL file (see attached photos where the STL at 100 is the same size as the 3MF at 108.) Im sure there are other skinnier bottles like the Bacardi, so now you know how much to scale it, and i will still use both to no loss on my end.

EDIT: the image uploader seems to be broken and makes the two screenshots portrait instead of landscape, but i think you can still get the jest from them - 3d model
This model is restricted by licensing terms. 

"This beautifully crafted piece showcases a detailed octopus tentacle curling from a porthole, bringing the mystique of the ocean into your home. Both a striking decoration and functional wine holder, it perfectly blends elegance and utility."

➡️Video by the talented coco3d

➡️As seen on the 3D Printing Nerd!

This awesome design print with no supports at all! And it can be printed in 2 colors on any printer. Just add a pause after printing the porthole window, swap filaments and keep printing.

"For the tentacle I used Esun dual color Green-Blue Silk Pla."

"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."

3D PRINTING SETTINGS:

-No supports needed!

-Factory files included for Bambu and Orca Slicers. For other slicers you can add a pause at 18.90mm and change colors manually.

-12% Rectilinear infill for the base, 7% rectilinear infill or more for the tentacle, 2-3 walls, 0.16mm layer height.


89 Likes157 DownloadsOctober 4, 2024


89 Likes157 DownloadsOctober 4, 2024
This model is restricted by licensing terms.