Knitted Grogu With Santa Claus Hat Ornament / Multiparts / 3MF Included
byIK3D.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
An adorable model of Grogu in his crib, with a knitted texture all around, wearing a knitted Santa Claus hat.
It´s super easy to print! Only the ¨head¨ file on the multi parts version needs a few supports under the ears, and it can be printed in multi parts that can be glued together, but also in a single piece in colors if you have a multicolor printer.
Includes:
-Multi parts version, so anybody can enjoy this model in colors with any 3d printer -Single piece Grogu that can be easy colored on Bambu Studio or other slicers with the bucket tool. -Pre configured Factory Files for Bambu Studio to print Grogu in a single piece, in multi parts with an AMS and in multi parts without AMS.
"All of my models are for personal use only, unless you are an active subscriber with a commercial license."
3D PRINTING SETTINGS:
-Super easy to print, only the ¨head¨ file needs a few supports under the ears.
-2 Walls, 6% rectilinear infill and 0.16mm layer height or lower.
-To glue the parts together, I like to use Loctite Superglue.