Horn & Rhode L

HueForge Frog Color Match

by
HueForge(Steve)
Follow
Follow
Remix Model
HueForge(Steve)
HueForge(Steve)
|
Image 1 of 3
HueForge Frog Color Match  3d model
HueForge(Steve)
HueForge(Steve)
|
Image 1 of 3
HueForge Frog Color Match  3d model
2D
3D
Makes
HueForge Frog Color Match  3d model
HueForge Frog Color Match  3d model
HueForge Frog Color Match  3d model

Seen on Twitter and Facebook - this Frog needs 8 colors (pick whatever black you want) and results in a colorful frog with wonderful coloring.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.7mm and the Actual Depth is 2.6mm

Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA Kingroon Red Transmission Distance: 4.2 PLA PolyLite Wine Red Transmission Distance: 1 PLA Jessie Premium Yellow Bird Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA PolyLite Azure Blue Transmission Distance: 3 PLA Prusament Simply Green Transmission Distance: 1.8 This print uses 8 unique filaments

Swap Instructions: Start with Black At layer #10 (0.52mm) swap to Dark Blue At layer #13 (0.64mm) swap to Red At layer #17 (0.8mm) swap to Wine Red At layer #21 (0.96mm) swap to Yellow Bird At layer #28 (1.24mm) swap to Ivory White At layer #34 (1.48mm) swap to Azure Blue At layer #41 (1.76mm) swap to Dark Blue At layer #44 (1.88mm) swap to Black At layer #45 (1.92mm) swap to Simply Green At layer #48 (2.04mm) swap to Yellow Bird At layer #56 (2.36mm) swap to Ivory White for the rest.


3 Likes15 DownloadsSeptember 16, 2024


3 Likes15 DownloadsSeptember 16, 2024

Instructions

Filament • 0.04mm

MaterialPLA
Layer height0.04 mm
Infill density100 %
SupportsNone
BrimNo