Made a minimalistic but nice toothbrush stand. Enjoy!

Toothbrush_stand_1.0.stl

Infill 60%

Used 40mm Nanotape+Screws and Drywalldowels to attach it to the wall. 

I printed the pedalmount laying on the side for maximum strength. The Wheelsupports arent necessary because the pedalmount is stiff enough but my bike only weights like 8 Kg i guess. 

Bike Wall Mount

Pedalmount.stl

The Mod is designed for cooling the FFB-Motor and Converter. 

You need to thrill a 76mm hole for the 80mm fan and a 89mm hole for the 90mm fan. 
For the Air-outtake it is recommended to thrill a 64mm hole in the back of the case, so the warm air can exhaust. The Grid_63 is the cover for that.

These standard-sized thrills are used in sets like this one for example: https://www.ebay.de/itm/265495445650. 

Infill 100% (isnt really thick)

Dont put your Printspeed to high because of the grid, you could lose adhesion.

You need normal PC-fan-screws to put it together, dont tight them up to much because the wall around the screwholes of the grid isnt that wide. You could also scale the height of the grids to prevent it from that. 

T300 Cooling Mod

Intake_90.stl

Grid_63.stl

220 x 100 x 40 mm Showertray for Shampoo

Printed at 40% Infill

Used doublesided 40mm Nanotape to attach to the wall.

Showertray.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Hashadin

Achievements

Seedling

Toothbrush_stand_1.0.stl

Bike Wall Mount

T300 Cooling Mod

Showertray.stl