Gill (Moorish Idol) Earrings.
Remember Finding Nemo? Nemo and Dory are always Memorable-but what about Gill?
These are a super simple, easy and QUICK file-an excellent choice to create something from those slim pickins spools (getting ready to run out or just not enough to use for major prints)
The 3MF has THREE different Color sets to get you started -this is also an easy to paint (re-paint model) to make your own exotic color combos. You can either delete or duplicate the files depending on your needs
This piece can be successfully sized up -depending on your need.. Can also be used to create a pendant to make an earring and pendant set.
Current size can use a 7-8mm/20 gauge jump ring for attaching
Print Time for color pattern -Approximately 2 hrs and 28min -to- 3hrs 6 min for 4 sets(depending on how many colors and sizes)
P1P/ Bambu Basic Aux fan should be at or below 20% or turned OFF (if using one)
Settings First Layer .12mm Other layers .16mm Ironing is turned on for topmost surfaces Arachne walls 2 wall loops 6 top shell 6 bottom shell 25 % Gyroid infill Initial Layer 35mm Initial Layer Infill 90mm Overhang speed 50, 20 5 and 5 respectively
Prime tower enabled (suggest it be used on the pattern multi colored print) Brim/Bed Adhesion: None Needed Flushing set at default (you will need to adjust this for your filaments and machine type)