This is a remix of the bottom portion of the toe clamp designed by DrDflo [here.](https://thangs.com/designer/DrDflo/3d-model/Low%20Profile%20Toe%20Clamp%20for%20CNC%20Router%20%28Heat-Set%20Insert%20Version%29-17810) This version allows slotting up to a 5/16" bolt through the clamp for use on T-Track.

 T-Track Bottom for Low Profile Toe Clamp 

Stubber-Clamp-Bottom-V2-T-Track-Remix.stl

Stubber-Clamp-Bottom-V2-T-Track-Remix-Long.stl

Holder for 3 2/3in x 9in (9.29cm x 22.8cm) sandpaper sheets commonly found in hardware stores. Holds ~16 sheets per bin. 

This model is slightly too large to fit on the prusa sized bed, so I have included a split version which can be printed twice to make the full bin.

Gridfinitity Sanding Sheet Holder

gridfinity-sanding-sheet-holder.stl

Holds 5 inch diameter sanding discs used for random orbital sanders.

Gridfinity Sanding Disc Holder

A set of racks of that can be placed in a line inside a gridfinity grid to sort longer items without having to print a giant divider bin. The length is in theory infinite since you just drop the racks wherever you need them in your layout.

There are two heights available, each with a single compartment or two compartments. 

Optional starter blocks can be used which have a space for a printed label and give your items something to bump up against so they don't get too unwieldy. 

Gridfinity Infinite Length Storage Racks

storage-rack-center-divided-tall.stl

**URRRNN!!!**

This is a 2x2 storage bin great for when you really want to slam things down onto your Gridfinity baseplates.

Thwomps can be stacked onto other Thwomps and can even wear other Gridfinity items like a hat.

**Versions**
The basic Thwomp is a simple box. There is an optional insert for this version which makes storing longer items like pens/pencils/markers a bit easier.

There is additionally a Thwomp with a filleted edge similar to standard Gridfinity divider bins to help make it easier to retrieve items inside.

**Print Settings**
I got the bets results on my setup using a .1 layer height with supports for Thwomp's face.

**Disclaimer**
Thwomp's face extends beyond the normal demensions of a 2x2 Gridfinity item. As such, Thwomp will work best if its placed at the front of your baseplate. Not sure why you would want to risk Thwomp's anger by covering it up anyway.

Gridfinity Thwomp Storage Bin

thwomp.stl

These single block holders are designed to hold a single router bit with a spot for a label.

There is a model available for 1/4", 1/2" and 8mm shank router bits.

I am not a woodworker and don't use my router bits often, so I found it worthwhile to sacrifice a bit of storage density to be able to easily identify each bit.

If you are better than I am at identifying bits at a glance, and would prefer something that stores more bits in less space, take a look at [this router bit caddy](https://thangs.com/designer/Zwierzak%252C%2520Does%2520a%2520Thing/3d-model/Gridfinity%2520Router%2520Bit%2520Caddy.stl-66298) by [Zwierzak](https://thangs.com/designer/Zwierzak%2C%20Does%20a%20Thing)

Gridfinity Router Bit Holder

This single block holder is designed to hold a single 1/4inch shank router bit with a spot for a label.

As I am not a woodworker and don't use my router bits often, I found it worthwhile to sacrifice a bit of storage density to be able to easily identify each bit.

gridfinity-router-bit-holder-1_2.stl

gridfinity-router-bit-holder-8mm.stl

These holders are designed to fit hex shank spade bits. The spacing between each slot in the trays is generic so as to try and fit a wide variety of sizes that you may have, rather than conforming to a specific set.

The six bit tray has tighter spacing between bits. Larger bits can be placed by skipping a slot, but I have also found that some small overlap doesnt make it difficult to retrieve bits.

The 4 bit holder has larger and more varied spacing between bits, making it ideal for larger bits greater than an inch wide.

Gridfinity Spade Bit Holder

gridfinity-6-spade-bit-holder.stl

Holds the razor blades used for utility knives, boxcutters etc. I found it easiest to load blades a couple at a time so as to not get all cut up.

Two versions are available:

A 1x2 block which holds about 50 blades.

A 1x3 block which hold about 100 blades.

Gridfinity Utility Knife Razor Blade Holder

gridfinity-razor-blade-holder.stl

A series of holders for 18 gauge brad nails.

Current sizes are:
5/8 inches
1 inch
1 1/4 inches
1 1/2 inches
1 3/4 inches
2 inches

I found it easiest to load the nails one or two strips at a time rather than trying to shove in the whole pack.

Gridfinity Brad Nail Holders

gridfinity-18ga-brad-nail-1_0_0inch.stl

gridfinity-18ga-brad-nail-1_1_2inch.stl

gridfinity-18ga-brad-nail-1_1_4inch.stl

gridfinity-18ga-brad-nail-1_3_4inch.stl

gridfinity-18ga-brad-nail-2inch.stl

gridfinity-18ga-brad-nail-0_5_8inch.stl

A set of holders for storing hex shank drill bits horizontally so that their sizing labels are visible.

Holders are currently designed to hold bits with a 1/4 (6mm) shank.

There are currently two holders available:

2x2 for storing six smaller bits
2x3 for storing four larger bits up to about 1/2 inch in size.

Holders are stackable depending on the size of bit being stored.

Gridfinity Hex Shank Drill Bit Holder

hex-shank-bit-tray-small.stl

A 2x3 stackable Gridfinity tray for holding driver bits horizontally in spaces where vertical storage is limited. Originally designed around a set of Milwaukee bits about 50mm in length, but should work with most driver bits up to 55mm in length.

To retrieve a bit simply push down on the end over the small divet in the tray to raise up the other end and remove it.

Gridfinity Driver Bit Tray

A 2x3 stackable Gridfinity tray for holding driver bits horizontally in spaces where vertical storage is limited.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

GobboLab

Achievements

Seedling

Explorer

Fan Favorite