This 12oz Can Cup is inspired by the wildly popular Pokemon anime, video game, and trading card game. It has slots on the side to attach Nintendo Joy-Con controllers so you can enjoy a nice cold beverage while hunting for all those shiny pokemon or playing any of your other favorite switch games.
The design is a remix of MandicReally's Warped Pipe - Nintendo Joy Con Grip 12oz Can Cup found @ https://thangs.com/MandicReally/Warped-Cup--Nintendo-Joy-Con-Grip-12oz-Can-Cup-18438 created in collaboration with MandicReally
Designed for a standard 12oz can with a 66m Diameter but can also accept most 16oz cans provided they do not have a sticker as a label.
INCLUDED FILES: CAD STEP File Pokeball Joy Con Grip Can .STL .STL for an adapter sleeve to fit 58mm cans
PRINT PARAMETERS: Zero Supports required Prints beautifully at a .2mm layer height I run them at 60mm/sec, 40mm/sec on the outer layer with 3 walls and 15% infill I recommend making sure that Ironing is disabled as it produces a less than desirable layer near the bottom of the print that is quite noticeable.
POST PROCESSING: Joy-Con Grips may require sanding for optimal fit, I use a flat jeweler's file which works great. I have found that in most cases this is dependent on the filament.